Inconel601 (N06601/NS313/2.4851) nut

Inconel601 (N06601/NS313/2.4851) nut

Similar grades

GB/T	UNS	Trademark	W.Nr
NS313	N06601	Inconel601	2.4851

 

Chemical composition of Inconel601 nut:

Alloy	%	Ni	Cr	Fe	C	Mn	Si	Cu	Al	P	S
Inconel601	Min	Balance	21	10					1.0
	Max		25	15	0.1	1	0.5	1	1.7	0.03	0.015

 

Physical Properties of Inconel601 Nuts

density	8.1g/cm3
melting point	1320~1370C

 

Inconel601 nut The minimum mechanical properties of the alloy at room temperature:

Status	tensile strength Rm N/mm2	Yield Strength RP0.2 N/mm2	Elongation A5%	Brinell hardness HB
Annealing	650	300	30	—
Solution treatment	600	240	30	≤220

 

This alloy has the following properties:

1. Excellent oxidation resistance at high temperatures
2. Excellent carbonation resistance
3. Good resistance to oxidation in sulfur-containing atmospheres
4. It has good mechanical properties at both room temperature and high temperature.
5. Excellent resistance to stress corrosion cracking. Due to the control of carbon content and grain size, 601 has high creep rupture strength, so at 500℃

 

The metallographic structure of Inconel601 nut:

601 is a face-centered cubic lattice structure.

 

Corrosion resistance of Inconel601 nuts:

An important property of 601 alloy is its oxidation resistance at temperatures up to 1180°C. Even under very severe conditions, such as during heating and cooling cycles, 601 can form a dense oxide film and achieve high peeling resistance. 601 has good carbonation resistance. Due to its high chromium and aluminum content, 601 has good oxidation resistance in high-temperature sulfur-containing atmospheres.

 

Inconel601 nut application scope application fields include:

1. Trays, baskets and fixtures used in heat treatment factories.
2. Wire strand annealing and radiant tubes, high speed gas burners, wire mesh belts in industrial furnaces.
3. Isolation tanks in ammonia reforming and catalytic support grids in nitric acid manufacturing.
4. Exhaust system components
5. Combustion chamber of solid waste incinerator
6. Pipe support and soot disposal department