Incoloy925 (N09925) nut
Category: Hexagonal nuts
Product grade:A grade
Strength level: Level 8 Width across sides: 8-120 Height: 5.6-60 (mm) Thread specification: M5-M100 Surface treatment: No treatment
Similar grades
| UNS | Trademark |
| N09925 | Incoloy925 |
Chemical composition of Incoloy925 nut
| Alloy | % | Ni | Cr | Fe | C | Mn | Si | Cu | S | Al | Ti | P | Mo |
| Incoloy 925 | Min | 42 | 19.5 | Balance | 1.5 | 0.15 | 1.9 | 2.5 | |||||
| Max | 46 | 23.5 | 0.03 | 1.0 | 0.5 | 3 | 0.03 | 0.5 | 2.4 | 0.03 | 3.5 |
Physical properties of Incoloy925 nuts:
| density | 8.14g/cm³ |
| melting point | 1343°c |
The minimum mechanical properties of Incoloy925 bolt alloy at room temperature:
| Status | tensile strength Rm N/mm2 | Yield Strength RP0.2 N/mm2 | Elongation A5% |
| Solid solution | 650 | 300 | 30 |
Incoloy925 nut alloy has the following characteristics
Has good mechanical strength and broad corrosion resistance
Incoloy925 nut Application scope Application areas:
Commonly used in the manufacturing of parts on oil and gas drilling equipment
Reviews
There are no reviews yet.