Showing 65–80 of 85 resultsSorted by latest
Description:
NiCrCoMo-1 is a nickel-chrome-cobalt-molybdenum alloy of type alloy 617. Alloy 617 is a nickel chromium cobalt molybdenum filer metal designed primarily for MIG and TIG welding of Inconel 617 base material.
Description:
ERNiCr-4 is a nickel-based alloy welding wire, mainly used for welding nickel-based alloys such as Inconel, Incoloy and Hastelloy. These alloys are commonly used in high temperature, high pressure and corrosive environments in aerospace, petrochemical, nuclear industry and other fields.
Description:
ERNi-1 is a nickel-based alloy wire used for argon arc welding and manual arc welding. The main components of this welding wire are nickel, chromium, iron, manganese and other elements, with excellent corrosion resistance, high temperature strength and oxidation resistance.
4J50 pins are made of 4J50 alloy. 4J50 alloy is an iron-nickel fixed expansion alloy with a specific expansion coefficient, also known as iron-nickel-cobalt glass-sealed alloy. This alloy has a linear expansion coefficient similar to that of hard glass in the temperature range of -60°C to +80°C, so it is often used for matching sealing with hard glass.
FlANGE Face Type:Flate Face(FF),Raised Face(RF),Ring Type Joint(RTJ)，male and female，etc.
Size:1/2″(15 NB)to 48″(1200NB)
Welding neck flanges (WNF), also known as Welding Neck Flanges or WN flanges, are a type of pipe fitting used to connect sections of pipe or to other pressure-containing equipment.
Slip-on flanges, also known as ‘hubbed flanges’, have a hub with a very low profile. This type of flange is usually connected to a pipe by one or two fillet welds (one outside the flange and one inside the flange), it is however possible to use only a single weld.
Welding plate Flanges
Welding plate flanges refer to the flanges that are welded onto a plate to provide reinforcement, support, or connection to other components. They are typically made of metal and are designed to be welded onto the plate using various welding techniques. The flanges can be of different shapes and sizes depending on the specific application and requirements.
FlANGE Face Type:Flate Face(FF),Raised Face(RF),Ring Type Joint(RTJ)，male and female，etc.
Size:1/2″(15 NB)to 48″(1200 NB)
Category: Stainless steel hexagonal bolt
Head type: External hexagonal thread
Tolerance: 6G
Material: F61/S32550/1.4507
Performance level: 8.8
Thread specifications: M6~M100
Head length across sides: 10-120 (mm)
Head thickness: 6.6-60 (mm)
Total length: 30~800(mm)
Category: Stainless steel hexagonal nut
Product grade: Grade A
Strength grade: Grade 8
Width across flats: 8-120
Height: 5.6-60 (mm)
Thread specification: M5-M100
Category: Stainless steel hexagonal bolt
Head type: External hexagonal thread
Tolerance: 6G
Material: F60/S32205
Performance level: 8.8
Thread specification: M6~M100
Head length across sides: 10-120 (mm)
Head thickness: 6.6-60 (mm )
Total length: 30~800(mm)
Category: Stainless steel hexagonal nut
Product grade: Grade A
Strength grade: Grade 8
Width across flats: 8-120
Height: 5.6-60 (mm)
Thread specification: M5-M100
Category: Hexagonal bolts
Head type: External hexagonal thread
Tolerance: 6G
Material: F55/S32760
Performance level: 8.8
Thread specifications: M6~M100
Head length across sides: 10-120 (mm)
Head thickness: 6.6-60 (mm)
Total length: 30 ~800(mm)
Category: Duplex Stainless Steel Hexagonal Nut
Product Grade: Grade A
Strength level: Level 8
Width across sides: 8-120
Height: 5.6-60 (mm)
Thread specification: M5-M100
Surface treatment: No treatment
Category: Hexagonal bolt
Head type: External hexagonal thread
Tolerance: 6G
Material: F53/2507
Performance level: 8.8
Thread specifications: M6~M100
Head length across sides: 10-120 (mm)
Head thickness: 6.6-60 (mm)
Total length: 30~800(mm)
End of content
End of content